Industrial Networking Solutions for Critical Infrastructure

The “Zenwall 10” is an excellent choice for network applications and a variety of machine-to-machine solutions that contains the following features:
 

• Intel XScale IXP-425, 533 MHz processor

• On-board 128 MB RAM, 32 MB flash

• Dual 10/100 Mbps Ethernet ports

• Compact Flash socket for mass storage disk expansion

• PCMCIA supporting WLAN, GPRS, UMTS, HSDPA

• Hardware level data encryption engine supports AES, DES, and 3DES

• SSL, SSH, TLS security function

• Deep Packet Inspection Firewall, Remote Backup, SSL/VPN, Protocol Filter, IDS/IPS and Router or Transparent Bridging function

• DIN-rail or wall-mount installation

• The certification logos shown here apply to Mu Security “MUSIC” certification -- basic and advanced.

The “Zenwall 10” is a rugged, compact embedded computer that is designed for industrial applications. Two key design features are low power consumption and fan less operation, which together ensure greater reliability and longer system life. The communication-oriented functionality includes both hardware and software. In fact, the software design is especially ideal for network communication based applications, such as a interconnect between SCADA and PLC’s or engineers through the internet. The “Zenwall 10” provides real-time data access, a secure network gateway, and a SSL/VPN router or bridge. The built-in web server allows the “Zenwall 10” to be used as a web-enabled simple GUI gateway for accessing, monitoring and control functions from anywhere.

The “Zenwall 10” provides an option for WLAN 802.11b/g connectivity, both wired and wireless networks can be integrated into one communication system. Users can capture real-time data from the network, and then use the “Zenwall 10” to convert data into various standard formats. Data can be buffered and then distributed to the proper interfaces.
 

CPU:

• “Zenwall 10”: Intel XScale IXP-425 533 MHz

• Zenwall Embedded OS (pre-installed): Embedded Linux

• DRAM: 128 MB onboard

• Flash: 32 MB onboard

• PCMCIA: Cardbus card and 16-bit PCMCIA 2.1/JEIDA 4.2 card

• Storage Expansion: Full function Compact Flash x 1 up to 2 Gig or SSD
   

LAN Interfaces:

• Ethernet: 10/100 Mbps x 2, RJ45 connectors

• Magnetic Isolation Protection: 1.5 KV built-in
   

Serial Interface:

• Console Port: RS-232, RJ45 connector, supports PPP

Serial Signals:

• RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND

• RS-422: TxD+, TxD-, RxD+, RxD-, GND

• RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND

• RS-485-2w: Data+, Data-, GND
   

LED’s:

• System: OS Ready x 1, Console (TxD/RxD) x 1

• LAN: 10M/100M x 2