Product Articles

McNaughton-McKay featured product articles.

Pull Wire and Rope Faster and Easier Run After Run with Greenlee’s G1 Versi-Tugger

Posted on Sunday Jul 12, 2020 | manual, pulling, wire,

Greenlee G1 Versi-TuggerThe Greenlee G1 Versi-Tugger was designed to replace manual pulling. Previously workers had to pull rope by hand which wasn’t a good solution. ... {Read More}

Greenlee’s Workhorse is an All-in-One Threading and Bending Workstation

Posted on Thursday Jan 30, 2020 | bender, conduit, threading,

Greenlee WorkhorseThe Workhorse™ from Greenlee is an all-in-one bending and threading station. Mobility is no longer a problem because the station features fork lift pockets on two sides that make it easy to move and place wherever you need it. The Greenlee 854DX and 855GX benders can be securely mounted using brackets providing a safe bending environment. ... {Read More}

Greenlee LS100L11A Battery Powered Punch Tool Saves You Time and Money

Posted on Thursday Sep 14, 2017

Greenlee LS100L11AGreenlee’s LS100L11A kit features the LS100 punch tool, a 120-volt battery and charger and a carrying case. If you are like other electricians, you probably spend a lot of time threading punches on and off of draw studs and wish it wasn’t so tedious and time consuming wrestling with punches and draw studs that are rusty and cross threaded. The LS100 will get you punching holes up to three times faster than standard threaded knockouts. The secret is in the no thread design. The punch slides onto the draw stud and the speed lock secures it in place making it the fastest knockout punch system on the market. This system is extremely strong and can withstand over 40,000 pounds of punching force. ... {Read More}

Greenlee’s Conduit Bending Table Has Gone Mobile

Posted on Friday Apr 01, 2016 | conduit, mbt, mobile-bending-table,

McNaughton-McKay Repair ServicesGreenlee’s newest bending innovation is the 881 Mobile Bending Table (MBT). The MBT is an all in one bending solution that gives operators the power and performance of the popular 881 bender on a wheeled table. It’s quick to setup and stores all components used for the 881 bender. It can also be wheeled around the job site with ease. This saves crews nearly an hour with every move. Whether you already own the 881 bender or our purchasing the bender and table together, the unit is rugged, feature-rich and designed to get each job done faster, safer and easier.... {Read More}

Greenlee End Stripper Adapter

Posted on Sunday Jun 14, 2015 | aluminum, cable, greenlee, saber,

If you’ve ever had to use a knife to strip cable, you knowthat cuts come with the territory. You also know that no two cables are ever stripped at the same depth. More times than you like to admit your knife has made contact with the conductor when you are stripping... {Read More}