MFQ6004
Berko®* Actual product may vary from image
6000W 240V DOUBLE WALL HTR F Fan-forced wall heaters deliver efficiency and perform powerfully across both residential and commercial applications. Electric wall heaters are great for entryways, dens, basements and bedrooms for residential applications, while they are ideal for larger areas in commercial applications such as hotels, restaurants and commercial office atriums.
Details
MFG PART #:MFQ6004
McMc Part #:MARLMFQ6004
UPC #:685360046839
Inventory
$1,865.00 E
Details
MFG PART #:MFQ6004
McMc Part #:MARLMFQ6004
UPC #:685360046839
Inventory
Attributes
Features
Documentation
Attributes
Brand:Berko®
Capacity:20525 Btu/hr
Color:Northern White
Height:22-19/32 in
Width:31-3/4 in
Type:Fan Forced
Series:MFQ
Power Rating:6000 W
Voltage Rating:240 V
Amperage Rating:25 A
Mounting Type:Wall
Material:Nickel Chromium with Steel Sheathing
Finish:Galvanized/Baked Enamel Paint
Features
| The back box shall be designed for duty as a recessed rough-in box in either masonry or frame construction and also when mounting directly to the surface of the finished wall in surface mounting installation |
| The back box shall be heavy gauge galvanized steel and shall contain knockout through which field wiring lead are brought |
| The inner frame assemblies shall consist of a heavy gauge steel chassis on which are mounted the heating element, fan motor and blade, thermostat, control and thermal cutout |
| The inner frame assemblies shall be completely prewired |
| The heating element shall be guaranteed for five years and shall be of non-glowing design consisting of 80/20 Ni/Ch resistance wire enclosed in a steel sheath to which steel plate fin are brazed |
| The element shall cover the entire air discharge area to ensure uniform heating of all discharged air |
| The fan motor shall be impedance protected, permanently lubricated and totally enclosed |
| Fan control shall be bi-metallic, snap action-type and shall activate fan after heating element reach operating temperature and continue to operate the fan after the thermostat is satisfied and until all heated air has been discharged |
| Thermostat shall be tamper-resistant on all model |
| Thermal cutout shall be bi-metallic, snap action-type designed to shut-off heat in the event of over heating |