7100017508
3M™* Actual product may vary from image
3M™ Motor Lead Inline Splicing Kits 5311-5314 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of inline connections at 1000 volts and less. The splice’s main component, the slip on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal.
Details
MFG PART #:7100017508
McMc Part #:3MCO5311
Inventory
$ E
Details
MFG PART #:7100017508
McMc Part #:3MCO5311
Inventory
Attributes
Features
Documentation
Attributes
Brand:3M™
Color:Black
Conductor Size:10 to 4 AWG Feeder Cable, 12 to 4 AWG Motor Lead
Connector Type:Pigtail
Dimensions:4 in L
Insulation Size:0.17 to 0.24 in OD
Material:EPDM Rubber
Number of Conductors:1
Series:5300
Splice Length:4 to 5 in
Temperature Rating:90 to 130 deg C
Voltage Rating:0 to 1000 VAC
Features
| Fast and simple installation |
| No torches or heat source required |
| No special tools required to install splice |
| Thick walls to resist puncture and abrasion damage |
| High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress |
| Easy re-entry, can be used on cables with a rated operating temperature of 90 deg c and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 V and less cables sized 16 AWG to 500 kcmil |
| Suitable for use with 30000 series copper compression lugs or other UL listed copper lugs |
| 365 V/mil dielectric strength |
| 750% elongation |
| 1400 psi tensile strength |