EYSEF400AL
Appleton®* Actual product may vary from image
Explosionproof Rigid/IMC Conduit Seal, Turning Radius 4.22 Inch, Trade Size 4 Inch, Connection Type Female, Material Epoxy Powder Coated Almag 35 Aluminum, Mounting Position Horizontal/Vertical, Enclosure Class I Div 1 and 2 Group A B C D, Class II Div 1 and 2 Group E F G, Class III, Approval UL 886/E10444, CSA C22.2, Size 11.06 Inch L x 6.5 Inch W, Constructional Feature Explosionproof, Dust-Ignitionproof, Raintight, Used On Threaded Rigid/IMC Metal Conduit
Details
MFG PART #:EYSEF400AL
McMc Part #:EGSMEYSEF400AL
UPC #:781381809894
Inventory
$ E
Details
MFG PART #:EYSEF400AL
McMc Part #:EGSMEYSEF400AL
UPC #:781381809894
Inventory
Attributes
Features
Documentation
Attributes
Brand:Appleton®
Dimensions:11.06 in L x 6.5 in W
Finish:Epoxy Powder Coated
Material:Almag 35 Aluminum
Series:EY Series
Size:4 in
Suitable For Use With:IMC/Threaded Rigid Metallic Conduit
Type:Dust-Ignitionproof Explosionproof Raintight
Features
| Smooth, rounded integral bushing in each hub to protect conductor insulation |
| Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity |
| Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub |
| Restrict any explosion to the sealed off enclosure |
| Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures |
| Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps |
| Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location |
| Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure |
| Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations |
| 40% fill expanded fill sealing fittings for close turning radius |