* Actual product may vary from image
Eaton Crouse-Hinds series AFA conveyor belt alignment switch, 15A, Two normally open, Feraloy iron alloy, 600 Vac
Details
MFG PART #:AFA20
McMc Part #:CRHIAFA20
UPC #:782274694795
Inventory
$ E
Details
MFG PART #:AFA20
McMc Part #:CRHIAFA20
UPC #:782274694795
Inventory
Attributes
Features
Documentation
Attributes
Brand:Eaton Crouse-Hinds series
Action:Snap
Actuator:Plunger
Amperage Rating:15 A
Contact Configuration:2NO
Dimensions:11.84 in W x 5.68 in H
Enclosure:NEMA 3/4/IP66
Material:Feraloy® Iron Alloy
Mounting:Surface
Series:AFA Series
Type:Explosionproof Replacement Double End
Voltage Rating:600 VAC
Features
| Finished with precision switches that provide normally open and normally closed contacts |
| Housing consists of a center section which can be mounted either vertically or horizontally and a switch housing with an attached switch operating arm |
| Enclosure has three 1 in conduit hubs, cast mounting lugs on 1-1/2 in center permit attachment to the web of a standard 3 in angle iron |
| Operating arm has 3-1/2 in long stainless steel protective roller, approximately 3/4 in lateral movement of operating arm actuates switch |
| Spring loaded operating arm will automatically return switch to normal position when belt interference is removed |
| A severe conveyor belt run-off can rotate the operating arm counter clockwise up to 85 deg without damage to the switch mechanism |
| Installation of AFA or AFAX unit on either side of a conveyor belt allows approximately 1 in or a pre-determined allowable belt misalignment before switch is actuated |
| A typical installation would include a pair of AFA or AFAX units at each end of the conveyor belt where belt returns |