ODS15-IDG
Leviton®* Actual product may vary from image
Decora Passive Infrared Wall Switch Occupancy Sensor, 180 Degree, 2100 sq. ft. Coverage, Self-Adjusting, Gray
Details
MFG PART #:ODS15-IDG
McMc Part #:LEVIODS15IDG
UPC #:078477010242
Inventory
$ E
Details
MFG PART #:ODS15-IDG
McMc Part #:LEVIODS15IDG
UPC #:078477010242
Inventory
Attributes
Features
Documentation
Attributes
Brand:Leviton®
Color:Gray
Control Output:Manual On/Automatic Off
Coverage:2100 ft
Dimensions:46 in H x 1.75 in W x 1.83 in D
Lamp Type:Fluorescent/Incandescent
Mounting Type:Wall
Power Rating:100/280 mW
Response Frequency:50/60 Hz
Sensor Type:PIR
Temperature Rating:0 to 50 deg C
Time Delay:30 s to 20 min
Type:1-Pole Low-Profile Photocell Controlled Single Relay
Viewing Angle:180 deg
Features
| Fits in standard wallbox and replaces 1-pole wall switch, ground connection required, gangable with other units |
| Low profile design eliminates obtrusive "scanning device" look |
| Convenient pushbutton provides manual ON/OFF light switching at any time |
| Two dual element PIR sensors used to widen detection range, relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts |
| Segmented fresnel lens provides optimum sensitivity and performance designed with an extensive "minor motion" area where even slight body movements will be detected |
| Vandal resistant PIR lens, 1-unit can be used for 120 to 277 VAC lighting, compatible with both electronic and magnetic ballasts |
| Horizontal field-of-view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required |
| Manual ON/auto OFF mode for installations where manual ON switching is required but auto OFF switching is still desired for CEC title T24 energy savings |
| To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active |
| Time delay in adapting mode, the time delay can be configured from 30 sec (test mode), 5, 10 and 20 min, in non-adapting mode, the delay can be configured from 5, 10, 20 and 30 min |