Training and Events

This course is a skill-building course that provides you with a basic understanding of AC and DC motor and drive concepts and terminology. At the completion of this course, you will have the necessary fundamental knowledge and skills required to attend other Rockwell Automation AC and DC drives courses.

This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware troubleshooting skills, and interpretation of ladder logic in a Studio 5000 Logix Designer® project.

This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware, and the Studio 5000 Logix Designer® programming environment.

This course provides information on the basic concepts of direct current (DC) electricity and magnetism, including electrostatics, basic circuit concepts, and measurement of electrical quantities and associated numerical concepts, Ohm’s Law, practical circuits, electromagnetism, and electrical measurements. There are hands-on exercises for device operation and simple circuit construction and analysis.

After completing this course, given a newly installed CENTERLINE® MCC with IntelliCENTER® software, you should be able to produce an operational motor control system over an EtherNet/IP network.

This course (CMP100-EL) provides you with the skills needed to add devices and program application code using Connected Components Workbench™ software. You will also be introduced to component-level devices.

This is a Rockwell Automation E-Learning course accessible through the virtual training platform, Learning+. These self-paced, modular courses can be taken on-demand on any PC or tablet. Access to Learning+ can be purchased for individual courses or via a year-long subscription, granting access to all available courses.

This is an in depth electrical safety course that covers electrical safety including LOTO and arc flash that meets the training requirements specified in OSHA 1910 and NFPA 70E.

In this course, you will learn how to verify communications between devices, recognize data transmission types, and differentiate between OSI Model Layer 2 and Layer 3 switching functions.

You will resolve issues with communication between devices on a network. You will troubleshoot an EtherNet/ IP network’s media and components (including the Stratix 5700 switch); run diagnostic tests to resolve system and port issues; and perform common functions such as resetting the switch.

This course (CCP183-EL) provides guidance on how to configure and troubleshoot an EtherNet/IP network. This includes setting EtherNet/IP network addresses, configuring a managed switch to meet network requirements, and monitoring managed switch performance. Examples, activities, and demonstrations in this course focus on the Stratix 5700 managed switch.

This is a Rockwell Automation E-Learning course accessible through the virtual training platform, Learning+. These self-paced, modular courses can be taken on-demand on any PC or tablet. Access to Learning+ can be purchased for individual courses or via a year-long subscription, granting access to all available courses.

After completing this course, given a computer with FactoryTalk® View Machine Edition (ME) software and a PanelView™ Plus 7 terminal, you should be able to produce an operational application running on the terminal.

This course (CCV204-A-EL) provides guidance on how to produce an operational application. This application will run on a PanelView™ Plus 7 terminal using a computer with FactoryTalk® View ME software and a PanelView Plus 7 terminal.

This is a Rockwell Automation E-Learning course accessible through the virtual training platform, Learning+. These self-paced, modular courses can be taken on-demand on any PC or tablet. Access to Learning+ can be purchased for individual courses or via a year-long subscription, granting access to all available courses.

This course provides you with the skills required to use FactoryTalk® AssetCentre software to maximize your control system investment and manage assets effectively. Throughout the course, you will learn how to design a FactoryTalk AssetCentre system, install and configure the software, secure access to the control system, track users’ actions, manage asset configuration files, provide backup and recovery of operating asset configurations, and troubleshoot your system using FactoryTalk AssetCentre software.

This is a Rockwell Automation E-Learning course accessible through the virtual training platform, Learning+. These self-paced, modular courses can be taken on-demand on any PC or tablet. Access to Learning+ can be purchased for individual courses or via a year-long subscription, granting access to all available courses.

This course provides you with the skills necessary to maintain and troubleshoot FactoryTalk® View Machine Edition (ME) applications that run on PanelView™ Plus 7 terminals. This course provides opportunities to work with both the hardware and software.

Upon completion of this course, you should be able to organize and develop FactoryTalk View Site Edition (SE) applications. This course provides opportunities for you to work with local FactoryTalk View SE applications. During class, you will have the opportunity to practice the skills used to create an application and build graphic displays.

This course (CCV207-EL) provides guidance on how to organize and develop FactoryTalk® View Site Edition (SE) applications. You will have the opportunity to practice the skills used to create an application and build graphic displays. You will learn how to configure alarms and security, trend data, and test your application using FactoryTalk View SE Client. You will also work with FactoryTalk Linx communications software and the FactoryTalk Diagnostics system.

This is a Rockwell Automation E-Learning course accessible through the virtual training platform, Learning+. These self-paced, modular courses can be taken on-demand on any PC or tablet. Access to Learning+ can be purchased for individual courses or via a year-long subscription, granting access to all available courses.

In this training, students will learn how the current standards dictate the selection, assembly, installation, validation, and maintenance of safety devices and components to reduce hazards from machinery and ensure the safety of people and the environment. Practical examples will demonstrate possibilities regarding machine protection.

Upon completion of this course, you will be able to create a Studio 5000 Logix Designer® project for a GuardLogix® system and troubleshoot a previously operational GuardLogix system.

This course (SAF-LOG104-EL) provides you with the ability to create a Studio 5000 Logix Designer® project for a GuardLogix® system and troubleshoot a previously operational GuardLogix system. In this class, you will learn GuardLogic concepts and terminology.

This is a Rockwell Automation E-Learning course accessible through the virtual training platform, Learning+. These self-paced, modular courses can be taken on-demand on any PC or tablet. Access to Learning+ can be purchased for individual courses or via a year-long subscription, granting access to all available courses.

This course provides information on the concepts associated with hydraulics, hydraulic systems and components, fluid principles, hydraulic system design, and hydraulic schematic symbology.

This course is designed to provide knowledge and skills required to install, maintain and troubleshoot machine controls.

This course (INA203-EL) provides both controls and IT engineers with a sufficient level of knowledge to collaboratively architect a converged multi-service plant-wide network. This course will help you operate as a credible domain expert in a multi-function team under the leadership of their counterpart.

This is a Rockwell Automation E-Learning course accessible through the virtual training platform, Learning+. These self-paced, modular courses can be taken on-demand on any PC or tablet. Access to Learning+ can be purchased for individual courses or via a year-long subscription, granting access to all available courses.

This course (INA204-EL) provides both controls and IT engineers with knowledge to collaboratively architect a smart Industrial Automation Control system using cloud technologies. Learn how Virtualization and Industrial Data Centers can help you deploy a robust network infrastructure.

This is a Rockwell Automation E-Learning course accessible through the virtual training platform, Learning+. These self-paced, modular courses can be taken on-demand on any PC or tablet. Access to Learning+ can be purchased for individual courses or via a year-long subscription, granting access to all available courses.

This course (INA201-EL) provides controls and IT engineers knowledge to allow them to collaboratively architect a machine or process skid network. Starting from the ground up, IT and OT professionals will learn how to design a logical and physical network infrastructure for their operation.

This is a Rockwell Automation E-Learning course accessible through the virtual training platform, Learning+. These self-paced, modular courses can be taken on-demand on any PC or tablet. Access to Learning+ can be purchased for individual courses or via a year-long subscription, granting access to all available courses.